Step 1 Gather Materials
Gather your materials.
DIY Concrete Plant Stand
Simple and modern, this DIY Concrete Plant Stand is the perfect showcase for your plants. Concrete, wooden dowels, water and a bucket are all you need to make this modern DIY Concrete Plant Stand.
Skill Level: Beginner
Time:
-
There are 12 steps to completing this project:
-
-
-
-
Step 2 Mark and Cut Dowels
Mark three 19-inch sections on your dowels and cut using a mitre saw.
-
Step 3 Mark Filling Line in Bucket
Using a tape measure, mark a 3.5-inch line inside your bucket.
-
Step 4 Pour Concrete
Pour concrete mixture into your bucket up until the marked line.
-
Step 5 Mix Concrete
Slowly pour clean water into the concrete and mix thoroughly until it is the consistency of cookie dough. Be sure not to overwater as this will compromise the strength of the concrete.
-
Step 6 Tap Out Air Bubbles
After mixing, tap your bucket several times to ensure it is level and you’ve removed any air bubbles.
-
Step 7 Place Dowels
One at a time, place your dowels in the middle of your bucket and set on the sides.
-
Step 8 Tape Dowels
To keep the dowels in place during the curing process, use masking tape to secure to the sides.
-
Step 9 Let Dry
Once your dowels are evenly in place, let dry at least 24 hours.
-
Step 10 Remove Stool From Bucket
Gently work the sides of the bucket until you can remove the stools.
-
Step 11 Sand Smooth
To finish off your stool, sand smooth.
-
Step 12 Enjoy!
Place your favourite plant on top and enjoy!
