Step 1 Gather Materials
Gather all materials. If you wish to create multiple planters, you will need 5 pavers for each. Lay down cardboard or old sheets to protect your working surface. An outdoor working location is recommended.
DIY Planter Box with Geometric Patterns
Let your creativity take shape with this simple-yet-stylish DIY planter. Using paving stones and paint, you can create a container garden with an artistic twist.
Skill Level: Beginner
Time:
-
There are 9 steps to completing this project:
-
-
-
-
Step 2 Glue Side Pavers Together
Apply a line of block adhesive to one side of the first paver and press it to one inside edge of the second paver to create 90-degree angle. Repeat with the two other side-pavers to create a perfect square. Ensure all edges are flush and pressed firmly in place.
-
Step 3 Glue Bottom Paver to Sides
Apply caulking all around the top of the side-pavers, and carefully place the bottom paver on. Wipe away any excess caulking.
-
Step 4 Let Dry 24 Hours
Allow to dry for at least 24 hours.
-
Step 5 Sand Outside Smooth
Using an orbital sander, sand the outside of the planter smooth.
-
Step 6 Outline Shapes With Tape
Carefully flip the planter right-side up. Use pieces of painter’s tape to outline the shapes and designs that you want your finished planter to have. Tape-off any areas you don’t wish to get paint on.
-
Step 7 Paint and Let Dry
Paint the non-taped areas and let dry.
-
Step 8 Remove Tape
Peel off the tape.
-
Step 9 Plant Shrubs
Plant shrubs or large plants and place around your patio or door to create a welcoming entryway.
