Step 1 Gather Materials
Gather materials.
DIY Industrial Media Console
Add a stylish and modern touch to any home with this simple to follow DIY. This media console made of natural wood and pipe is the perfect storage solution for your living room or basement.
Skill Level: Beginner
Time:
-
There are 9 steps to completing this project:
-
-
-
-
Step 2 Assemble Feet
Assemble feet by screwing flanges to the top and bottom of 1 ½” pipe.
-
Step 3 Attach Pads
Attach felt pad to the bottom end of each foot.
-
Step 4 Mark, Drill and Attach Feet
Place assembled feet at the corner of your board. Mark circle around flange as well screw holes. Drill guide holes and then attached flange with screws. Repeat until all four feet are attached.
-
Step 5 Flip
Flip over the bottom portion of the media console.
-
Step 6 Assemble Struts
Assemble struts by screwing flanges to the top and bottom of the 12” pipes.
-
Step 7 Mark, Drill and Attach Struts
Place assembled struts at the corner of the bottom board. Mark circle around flange as well screw holes ensuring holes are misaligned with feet flanges. Drill guide holes and then attached with screws. Repeat until all four struts are attached.
-
Step 8 Flip and Attach Struts
Flip and attach top board by repeating step 7.
-
Step 9 Enjoy
Fill and Enjoy.
